800-235-8090

800-235-8090
sales@keystoneparts.com

Thursday, May 9, 2019

Lack of flow with Nordson® Mini Blue® Applicators



There are several possible causes to little or no glue flow from your glue module.

Possible Reason
Remedy
Nozzle is clogged
Replace nozzle or clean nozzle.  Use KNCK10 cleaning kit.
Adhesive has entered air section of module
Replace module.  Part No. 100K001A01.
Module failed due to end of life
Replace module.  Part No. 100K001A01.
Dirty/faulty pneumatic valve
Replace valve.  Part No. 100K101A01.
Faulty encoder
Test encoder and replace if defective.

Looking for technical help, please contact us.

Angela Wagley
www.keystoneparts.com
sales@keystoneparts.com
800-235-8090

Tuesday, May 7, 2019

Which Glue Module do you need?


Modules, Modules, Modules….Which one is right for my application?



There are a variety of glue modules and for a good reason.  Different applications require different types of adhesive output, cutoff, speed, thickness, etc.

Most basic case packing uses the standard H200 style modules, whether it is a Surebead ® , ClassicBlue® or the older H200 standard style, this is where you would look first.  This is an area where savings can be great.  Don’t overspend on the Cadillac version module, when you could gain perfect results from the Kia version module. 

On your high speed applications, you are probably looking for an air open/air closed module for a quick cut off.  Keystone offers the KNH44C style and the new mini style module for those types of applications.  The mini style is a replacement for the Nordson® Mini Blue® II module, but will cost you a fraction of the price.  The fast acting Keystone mini provides long life and, at times, outlasts the OEM modules.

On your non-woven applications, you are probably looking for a swirl adhesive pattern.  The module is set up to provide air to the nozzle to create the swirl/spray pattern.  Our KNH2CS will provide that result.

Do you have large assembly products where there is a need for an excessive amount of adhesive output?  You may be looking for a module that has a large ball and seat that has a larger opening, allowing for higher amounts of glue flow.  Our KNH2X-LBS module is great for those types of applications.

We manufacture many more styles of modules.  Please do not hesitate to contact us for suggestions.  We are here to make your job easier.

Angela Wagley
www.keystoneparts.com
sales@keystoneparts.com

800-235-8090

770-586-5990