Wednesday, February 27, 2019

Clearing Nordson®  ProBlue® F9 Fault

Normally, there is no need to monitor the operation of the auto-fill system.  But, if the fill system is unable to satisfty the level sensor in the time limit set for the Fill Time Delay (parameter 48), an F9 fault will display and the alarm will sound.

Follow the simple instructions below to reset and clear the fault:

  1. Melter fault light (red)
  2. Melter ready light (green)
  3. Refill alarm LED (red)
  4. Fill system enable key
  5. Clear/reset key
  6. Enter key
Note:  When the refill alarm output is activated, the melter heaters stay on and the melter ready remote output remains active.
  1. Press the Fill System Enable key (4) to disable the fill system and the alarm.
  2. Correct the fault condition.
  3. Press the Clear/Reset key (5).
  4. Press the Fill System Enable key (4) to enable the fill system.
Note:  It may take up to 30 seconds for the reset command to take effect.

If errors continue, please call us for free technical assistance.

Friday, February 1, 2019

Nordson® F1 Fault - Installing New Hose

You have just spent half an hour removing an old glue hose and installing a new glue hose, powered up your Nordson® ProBlue® melter and, BAM.....An F1 Fault Light. That bites! Fortunately, it is a quick and easy fix. 

The fault indicates there is a compromise in one of the electrical connections. In other words, one of the 2 connections is not fully plugged in.

 • Power off melter.
 • Check both electrical connections on both ends of the hose.
 • Turn power on for melter and you should be good to go. 

If you are still seeing the F1 Fault, call us for free technical support…..800-235-8090 or email at sales@keystoneparts.com

f you have an old worn out glue hose, please call us for a replacement. We can save you money over the OEM prices, provide shorter lead times, provide a warranty and 100% money back guarantee, if you are not satisfied. 

Angela Wagley

We believe in empowering companies with optionsto grow their business on their terms, not ours