Air pressure for Nordson ProBlue Melters

Pressure Gauges

If your pump is shifting erratically and/or the glue output is not up to par, check the following in order to reach maximum adhesive output:

• Verify the factory's air is clean and dry.
• Verify the air supply is capable of providing a maximum of 6.2 Bar (90 psi) of non-lubricated air.
• Read the specifications on your specific adhesive and what is recommended.

It is suggested that an isolation valve be installed in the factory air supply line immediately before the melter.

Minimum operating air pressure is 0.7 bar (10 psi).  Operating at pressures lower than the minimum may cause the pump to malfunction.

Still having issues, please call us.

800-235-8090
Angela Wagley
sales@keystoneparts.com
www.keystoneparts.com