800-235-8090

800-235-8090
sales@keystoneparts.com

Tuesday, March 26, 2013

Over Temp Thermostat for Nordson ProBlue/DuraBlue Melters

KNS0108
The overtemp tank thermostat will protect your glue tank from over heating in the event that the heater decides to run away.  This can be caused by a faulty heater or faulty RTD sensor.  

If your Nordson unit will not power on, check the continuity between the leads of your over temp thermostat.  You may need to replace the tank over temp thermostat.

This is a 500 degree open on rise over temp thermostat that sells for $50.00/each. 
We recommend you keep one of these on the shelf for backup.

Have other issues with your melter, please call us for free technical assistance.

Angela Wagley
800-235-8090